Bukan cuma soal volume, tapi soal rasa yang dibawa lewat suara.
Follow Us :
Sale!

KORG MS-20 Mini Monophonic Synthesizer

Original price was: Rp12.890.000.Current price is: Rp9.750.000.

SKU: korgms20mini Brand:

Description

Main Specifications

Keyboard
C – C: 37-notes (3 octaves), mini keyboard designed specifically for the MS-20 mini
Manual controller
Control wheel (center click),   Momentary switch –>GND
Input and Output
Signal In: Amplifier Out,
Band pass filter Out,
CV Out (0 – +8.4V),
ENV Out (0 – +5V),
Trig Out (+5V–>GND),

Signal out: Signal output (mono 1/8″ mini phone jack, 2Vp-p output impedance 3.5k Ω)

Head phones: Head phones output (Stereo 1/8″ mini phone jack, 33 Ω 48mW),

USB: Type B, USB-MIDI Input/Output
*Only note messages (velocity is not used) can be transmitted and received.

MIDI: MIDI Input
*Only note messages (velocity is not used) can be transmitted and received.

Power Supply
DC9V
Dimensions:
(W x D x H)
493 ×257 ×208 mm / 19.41 x 10.12 x 8.19 inches
Weight
4.8 kg / 10.58 lbs.
Accessories
AC adaptor (9V/1.7A), Patch Cord x 10

Detailed Specifications

Control Section
1. Keyboard
C – C: 37-notes (3 octaves), mini keyboard designed specifically for the MS-20 mini
2. Voltage Controlled Oscillator 1 (VCO 1)
Scale (32′, 16′, 8′, 4′) (6 octaves, +cent, -cent)
Wave form (Triangle, Sawtooth, PW-Square, White Noise) (4 modes)
Pulse width adjust 1:1 – 1:infinity
3. Voltage Controlled Oscillator 2 (VCO 2)
Scale (16′, 8′, 4′, 2′) (6 octaves, +cent, -cent)
Wave form (Sawtooth, Square, Pulse, Ring modulator) (4 modes)
Pitch (± 1 octave)
4. VCO Master control
Master tune (± 100cent)
Portamento (max. 10sec)
FFrequency modulation intensity by MG/T.EXT (-5V – +5V)
Frequency modulation intensity by EG1/EXT (-5V – 0V)
5. VCO Mixer
VCO 1 Level
VCO 2 Level
6. Voltage Controlled High Pass Filter (VCF HPF)
Cutoff frequency (50Hz – 15,000Hz)
Peak (flat – self OSC)
Cutoff frequency modulation intensity by MG/T.EXT (-5V – +5V)
Cutoff frequency modulation intensity by EG2/EXT (-5V – +5V)
7. Voltage Controlled Low Pass Filter (VCF LPF)
Cutoff frequency (50Hz – 15,000Hz)
Peak (flat – self OSC)
Cutoff frequency modulation intensity by MG/T.EXT (-5V – +5V)
Cutoff frequency modulation intensity by EG2/EXT (-5V – +5V)
8. Envelope Generator 1
Delay time (10sec)
Attack time (10sec)
Release time (10sec)
9. Envelope Generator 2
Hold time (20sec)
Attack time (10sec)
Decay time (10sec)
Sustain level (0V – 5V)
Release time (10sec)
10. Modulation Generator (LFO)
Wave form (Positive Sawtooth – Triangle – Negative Sawtooth, Wide Pulse – Square – Narrow Pulse)
Frequency (0.1Hz ~ 20Hz)
11. Manual controller
Cntrol wheel (center click)
Momentary switch –>GND
12. Power switch and Volume
Volume
13. Indicator
LED (KBD trigger, Modulation Generator rate, Power ON)
External Signal Processor
1. Control section
Input signal level
Low cut frequency (50Hz – 2,500Hz)
High cut frequency (100Hz – 5,000Hz)
CV adjust
Threshold level
2. Input and Output
Signal In
Amplifier Out
Band pass filter Out
CV Out (0 – +8.4V)
ENV Out (0 – +5V)
Trig Out (+5V–>GND)
3. Indicator (LED)
Peak indicator
Trigger indicator
Patch Panel
1. Keyboard
Keyboard control voltage output (Exponential) (0 – +8V)
Keyboard trigger output (+5V–>GND)
VCO-1 + VCO-2 control voltage input (Linear response) (0 – +8V)
VCO-2 control voltage input (Linear response) (0 – +8V)
2. VCO
VCO-1 + VCO-2 external frequency control input (OCT/V) (-5V – +5V)
3. VCF
External signal input (3Vp-p max.)
External High pass filter cutoff frequency control input (2OCT/V) (-5V – +5V)
External Low pass filter cutoff frequency control input (2OCT/V) (-5V – +5V)
4. VCO + VCF
Total external modulation input (T.EXT) (-5V – +5V)
5. VCA
External initial gain control input (0 – +5V)
6. EG
EG 1 envelope signal normal output (-5V – 0V)
EG 1 envelope signal reverse output (+5V – 0V)
EG 1 + EG 2 trigger input (–>GND)
EG 1 trigger input (–>GND)
EG 2 envelope signal reverse output (+5V – 0V)
7. MG
Triangle output (Positive Sawtooth – Triangle – Negative Sawtooth) (5Vp-p)
Rectangle output (Wide Pulse – Square – Narrow Pulse)(0 – +5V)
8. Noise Generator
Pink noise output (5Vp-p)
White noise output (5Vp-p)
9. Sample and Hold
Clock trigger input (–>GND)
Sample signal input (5Vp-p max.)
S/H output (5Vp-p max.)
10. Modulation VCA
Control voltage input (0 – +5V)
Signal input (-5V – +5V)
Signal output (-5V – +5V)
11. Manual controller
Control wheel output (-5V<–0V–>+5V)
Momentary switch output (–>GND)
12. Signal out
Signal output (mono 1/8″ mini phone jack, 2Vp-p output impedance 3.5k Ω)
13. Head phones
Head phones output (Stereo 1/8″ mini phone jack, 33 Ω 48mW)
14. USB
Type B, USB-MIDI Input/Output
*Only note messages (velocity is not used) can be transmitted and received.
15. MIDI
MIDI Input
*Only note messages (velocity is not used) can be transmitted and received.
Others
Power Consumption
9W
Power Supply
DC9V
Dimensions
(W x D x H)
493 ×257 × 208 mm / 19.41 x 10.12 x 8.19 inches
Weight
4.8 kg / 10.58 lbs.
Accessories
AC adaptor (9V/1.7A), Patch Cord x 10

Garansi Resmi Korg 1 Tahun